产品详情有图信息
- 信息类型:求购
- 价格:0
- 所属行业:缝后设备
- 数量:不限
- 发布时间:2018-12-17
- 所在地区:广东广州
详细介绍:
基本参数:
电压:110/220V
频率:50/60Hz
底板尺寸:205x118mm
进水管长度:2.0M
水桶容积:4.0L
发热管功率:1.0Kw
Voltages:110V/220V
Frequency:50-60Hz
Size:205x118mm
Inlet-pipe Length:2M
Capacity:4L
Power: 1.0KW
产品特点:
1、采用型密封材料,抗老化,密封性能好;
2、底板采用高密度压铸制造、TEFLON喷涂,光滑,不粘面料,耐磨;
3、采用国际品牌电磁阀和耐高温电源线;
4、进口U/L认证双金属片温控器,动作寿命有15万次以上;
5、可拆卸出汽底板,清洗方便;
6、M型镀铜发热管,发热均匀,不易产生滴水现象。
使用方法:
将水桶里盛满水,挂在离熨斗使用位置高出1M以上的地方;接通电源,然后根据烫衣所需,将温度调到适当位置;再调节进水流量,待加热灯灭后即可开始使用。
适用范围:配件烫、干烫
FEATURES:
1. Adopt the newest sealing material; prevent degradation, good sealing function;
2.Heating base adopt TEFLON spraying,, smooth, no viscidity facing material, abrasion proof;
3.Adopt the best international solenoid valvethe high temperature cord power line;
4.Import U/L Certificate for sheet metal thermostat, the operating life can be above 150 thousand times….
5.Detachable heating base for easier to clean.
6.M-Type copperize heating pipe, heating equalityno easy drip.
How to use:
Hang up the bottle with water onto the stand(about 1M high);
Connect the cord, according to the temperature of the launder to adjust the suitable temperature conditioner;Then adjust the water flow rate,begin to use after the heating lamp off;
Application:Parts ironingdry ironing.